MIPRO ma707 - Manual (Page 7)

Types of Optional Wireless Microphone Receiver Modules.
Installing a Wireless Microphone Receiver Module :
(B3) Tone Control : Turn counterclockwise to increase bass or turn clockwise to
increase treble. Positioned at 12 o'clock for a flat response.
(B4) LINE IN Volume Control: Controls the volume of an input from an external source.
(B8)
(B5) Mic 1 Volume Control : Control the volume of the wired microphone.(B9)
(B6) Mic 2 Volume Control : Control the volume of the wired microphone. ( B10 )
(B7) Line Out Socket : Line level output. Allows you to use the MA-707 as a program input
source for some other audio device.
(B8) Line In Socket : Allows you use an external device with unbalanced audio output
signal as an input to the MA-707.
(B9) Wired Microphone Input Socket (Unbalanced) : Allows you to use an unbalanced,
wired microphone as an input source.
(B10)Wired Microphone Input Socket (XLR Balanced) : Allows you to use wired
microphone with a balanced XLR connector as an input source.
MIPRO offers a selection of optional wireless microphone receiver modules. Each
module has unique features and you may install one or two modules in the MA-707.
1. MA-707 VHF, 1-Channel, Fixed Frequency, Receiver Module.
2. MA-707 UHF, 1-Channel, Fixed Frequency, Receiver Module.
Unscrew the 2 screws from the filler panel and remove the filler panel before
installing the receiver module. After the screws and filler panel have been removed, insert
receiver module into the empty slot and push it back in to it's mating connector. Uses the
screws removed previously to fasten the receiver module in position.
Wireless Amplifier
Operating Manual
- 5 -