CIRCUTOR CIRLAMP Series - Manual (Page 50)

Container element: <D1>
< D1> is the container element for information relating to the event:
It contains data relating to the event, if necessary.
Container element: <D2>
< D3> is the container element for information relating to the event:
It contains data relating to the event, if necessary.
4�6�4�14� L17-E17, Memory work interval, via time configuration.
Format of configuration file E17 ( Figure 49 ):
<Order IdReq=”E17” IdPet=”111” Version=”3�0”>
<CirLamp Id=”CIR0000001”>
<E17>
<Node nodeId=”ALLNODES”>
<Interval power1=”60” hour2=”19” min2=”00” power2=”10”
hour3=”00” min3=”30” power3=”80” hour4=”05” min4=”40” power4=”100”/>
</Node>
</E17>
</CirLamp>
</Order>
Figure 49: File E17�
Format of configuration file L17 ( Figure 50 ):
<Report IdRpt=”L17” IdPet=”148” Version=”3�1”>
<CirLamp Id=”CIR0000000001”>
<L17 Fh=”20140310160019W”>
<Node Id=”1301250033” hour1=”9” min1=”48” power1=”100” hour2=”19”
min2=”0” power2=”70” hour3=”0” min3=”30” power3=”50” hour4=”5” min4=”40” pow-
er4=”100”/>
<Node Id=”1301316033” hour1=”9” min1=”48” power1=”100” hour2=”19”
min2=”0” power2=”70” hour3=”0” min3=”30” power3=”50” hour4=”5” min4=”40” pow-
er4=”100”/>
</L17>
</CirLamp>
</Report>
Figure 50: File L17�
Where:
Root element: <Report/Order>
<Report/Order> is the root element of the file. Its attributes indicate the data necessary to
process the file:
Table 62:File L17-E17, element <Report/Order>
Attribute Description
IdRpt/IdReq Report/order identifier.
IdPet Single identifier for the order.
Version Version identifier.
50
CirLAMP system
Instruction Manual