CIRCUTOR DHB Series - Manual (Page 25)

25
Table 5
dLY1
dLY2
dLY3
dLY4
Delay of alarm switching (time of
delay by alarm switching on and
switching off.
0...900
LEd1
LEd2
LEd3
LEd4
Support of alarm signaling. In
the situation when the support
function is switched on, after the
alarm state retrea, the signaling
diode is not blanked. It signals
the alarm state till its blank-
ing moment by means of the
push-button com-
bination. This function concerns
only and exclusively the alarm
signaling, thus relay contacts will
operate without support accord-
ing to the chosen type of alarm.
oFF – function switched off
on – function switched on