Doremi DCP to ShowVault Conversion Procedure - Manual (Page 14)

Figure 30: Bracket with Slot Cover
• Re-install the AES/VGA bracket (with the slot cover) back into the same slot that it was
in previously (Figure 31).
Figure 31: Tightening Screw in Place
• Re-insert the VGA cable back into the same slot using the two nut screws (on the back
of the rear panel).
Figure 32: Inserting VGA Cable
• Remove the cover bracket that is next to the 10.6w fan.
SHV.DP.001547.DRM Page 14 Version 1.4
Doremi Labs