1 introduction, 1 purpose, 3 dolby cp850 (audio processor) software version – Doremi DCP-2000 User Manual
Page 3: 4 required items
1 Introduction
1.1 Purpose
This document provides instructions on how to setup and configure the ShowVault-3, ShowVault-4,
and associated IMB, DCP2000, or DCP-2K4 units to use the Dolby Atmos feature.
1.2 Doremi Server Security Manager and Firmware Versions
The Doremi server and IMB will need to be at the following Security Manager (SM), Firmware (FW),
and Software (SW) versions.
Server
DCP2000 and DCP-2K4 Servers
•
SW: 2.6.4 (or latest version)
•
FW: 21.3s (or latest version)
•
SM: 2.1.102 (or latest version)
ShowVault-3 and ShowVault-4 Servers
•
SW: 2.6.4 (or latest version)
IMB
•
FW: 30.07t (or latest version)
•
SM: 5.1.107 (or latest version)
1.3 Dolby CP850 (Audio Processor) Software Version
The Dolby CP850 will need to be at the following Software (SW) Version:
•
SW: SW V_1.3.0.1 (or latest version)
1.4 Required Items
The following items are required for this procedure:
•
Doremi DCP2000/DCP-2K4 Server or Doremi ShowVault/IMB
•
Dolby CP850 (Audio Processor)
•
DLM (Refer to Section 2.4)
D2K.OM.003651.DRM Page 3 of 33 Version 1.1
Doremi Labs