Holland Electronics NE 1100 - Manual (Page 13)

13
NE1100A2 CATV Optical Receiver Operation Manual
Optical receiving power Testing point voltage
dBm mW V
-4 0.40 2.40
-3 0.50 2.50
-2 0.63 2.63
-1 0.79 2.79
0 1.00 3.00
1 1.26 3.26
2 1.58 3.58
3 2.00 4.00
Table 3 Optical Receiving Power vs. Test Point Voltage
5.0 Pre - Installation Steps
5.1 Small Parts Checklist
Locate the following items included with the NE1100:
1) Fuses (2) - located in bottom of receiver housing
2) #3 std. screws (4)
3) Pin-to f-type connectors (3)
4) 75 Ω terminators (3)
5.2 Opening the Receiver Housing