KBC Networks ESML6-P3 - Manual (Page 20)

Ethernet Switch User Manual
Manual_web_mgt_sw-ESML6-P3-Rev 1107
Copyright © KBC Networks Ltd. 2011 Page 19 of 51 www.kbcnetworks.com
3.1.3.4 Link Check
The Link Check status function is used to ensure that a link exists between the
redundant ports in case other devices eg. media converters are between the two
redundant ports. Settings in RSTP, STP or DT-Ring must be configured before the Link
Check function can be enabled.
Enable the Administration Status for the desired port and select <Apply> for changes to
be made effective.
Fig 3-24 Link Status Configuration
Fig 3-25 Link Status