1 overview, 2 logging in, 1 introduction – KBC Networks ESML6-P3 User Manual
Page 4
Ethernet Switch User Manual
Manual_web_mgt_sw-ESML6-P3-Rev 1107
Copyright © KBC Networks Ltd.
Page 3 of 51
www.kbcnetworks.com
1 Overview
1.1 Introduction
This manual covers the ESML6-P3 series management software. This software supports
Telnet, SNMP protocols and is compliant with networking regulations. This switch can be
managed and monitored using third party software. Configuration of the switch,
monitoring and other network management features can be achieved in 3 ways:
•
via the console port (HyperTerminal)
•
using Telnet
•
using a web browser
2 Logging in
To access the switch via a web browser, the switch needs to be connected from one of its
RJ45 ports to the computer. The factory settings for logging are shown below. The user
can view or modify the IP address once in the management software.
IP address：
192.168.0.2
Subnet mask：
255.255.255.0
Default gateway：
192.168.0.1
Access the web in the following way:
1.
Start a web browser and enter the appropriate IP address, press the enter key to
open the connection as shown in Fig 2-1:
2.
Enter the user name “admin” and password “123” in the presented page and
click on the “Log in” button.
Fig 2-1 Start Web Management