NEXCOM NViS 2310 - Manual (Page 52)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 38
Chapter 4: System Setup
NViS2310 User Manual
Installing a SSD/HDD Drive
1. Loosen the thumb screws on the SSD/HDD drive bay and slide the drive
bay out.
2. Insert the hard drive into the drive bay with the SATA data and power
connector facing towards the end. Align the hard drive’s mounting holes
with the mounting holes on the drive bay, and use the provided screws
to secure the hard drive in place.
Mounting
screws
Thumb
screws
SATA
data/power
connector