Installing a pci express x8 card – NEXCOM NSA 5130 User Manual
Page 62
Advertising
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
49
NSA 5130 User Manual
Chapter 3: System Setup
Installing a PCI Express x8 Card
1. By default, the system comes equipped with a PCI Express x8 slot. The
slot is on a riser card that is attached on an L-shaped bracket.
Remove the mounting screws that secure the L-shaped bracket to the
chassis and then remove the bracket.
L-shaped
bracket
2. Remove the slot cover’s mounting screw.
Slot cover
PCI Express x8
slot
Riser card
Mounting screw
Advertising