NEXCOM NSA 5130 - Manual (Page 76)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 63 NSA 5130 User Manual
Chapter 4: BIOS Setup
PCI Subsystem Settings
This section is used to configure the PCI.
In case of multiple Option
ROMs (Legacy and EFI
Compatible), specifies
what PCI Option ROM
to launch.
BIOS SETUP UTILITY
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
← →: Select Screen
↑↓: Select Item
Enter: Select
+-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save
ESC: Exit
PCI Bus Driver Version
PCI ROM Priority
PCI Common Settings
PCI Latency Timer
VGA Palette Snoop
PERR# Generation
SERR# Generation
PCI Express Device Settings
Relaxed Ordering
Extended Tag
No Snoop
Maximum Read Request
PCI Express Link Settings
ASPM Support
WARNING: Enabling ASPM may cause some
PCI-E devices to fail
Extended Synch
V 2.03.00
[EFI Compatible ROM]
[32 PCI Bus Clocks]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Disabled]
[Disabled]
Advanced
PCI ROM Priority
In case multiple option ROMs (Legacy and EFI Compatible) exist, select the
PCI option ROM to launch.
PCI Latency Timer
This feature is used to select the length of time each PCI device will con-
trol the bus before another takes over. The larger the value, the longer
the PCI device can retain control of the bus. Since each access to the
bus comes with an initial delay before any transaction can be made, low
values for the PCI Latency Timer will reduce the effectiveness of the PCI
bandwidth while higher values will improve it.
VGA Palette Snoop
Enables or disables the VGA palette registers snooping.
PERR# Generation
Enables or disables the PCI device to generate PERR#.
SERR# Generation
Enables or disables the PCI device to generate SERR#.
Relaxed Ordering
Enables or disables the PCI Express device relaxed ordering.
Extended Tag
When this function is enabled, it allows a device to use 8-bit tag field as
a request.
No Snoop
Enables or disables the PCI device’s no snoop option.
Maximum Read Request
Selects the maximum read request size of the PCI Express devices.
ASPM Support
Selects the ASPM level.
Force L0 Forces all links to L0 state.
Auto
The BIOS automatically select an ASPM level.
Disable Disables ASPM.
Extended Synch
When this function is enabled, it allows generation of extended synchro-
nization patterns.