NEXCOM NSA 5130 - Manual (Page 87)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 74 NSA 5130 User Manual
Chapter 4: BIOS Setup
Parallel Port
Enables or disables the parallel port.
Change Settings
Selects the optimal setting for the Super IO device.
Device Mode
Selects the parallel port mode.
Enable or disable
Parallel Port (LPT/
LPTE)
BIOS SETUP UTILITY
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5
Change Settings [Auto]
Device Mode [STD Printer Mode]
Advanced
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
Parallel Port Configuration
BIOS SETUP UTILITY
Version 2.11.1210. Copyright (C) 2011 American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
PC Health Status
CPU Temperature : 32 C
FAN1 Speed : 5947 RPM
FAN2 Speed : N/A
FAN3 Speed : 9000 RPM
FAN4 Speed : 9507 RPM
FAN5 Speed : 10800 RPM
VCORE : +1.152 V
VIN0 : +1.504 V
VIN1 : +1.104 V
VIN2 : +5.120 V
VIN3 : +12.000 V
AVCC : +3.296 V
3VCC : +3.296 V
VSB3 : +3.344 V
VBAT : +3.296 V
Advanced
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
CPU Temperature
Detects and displays the current temperature of the CPU.
Fan1 Speed to FAN5 Speed
Detects and displays the current fan speed in RPM (Revolutions Per
Minute).
VCORE to VBAT
Detects and displays the output voltages.
Options
Disabled
Enabled