Paxton Superchargers Plymouth Prowler - Manual (Page 4)

P/N: 4809629
©2003 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
22OCT02 v2.0 PlymProwler(4809629v2.0) iv
2000-2001 Plymouth Prowler
IMPORTANT NOTES
Congratulations! You have purchased the finest street supercharger available for the 2000-2001 Plymouth
Prowler. The centerpiece of this kit is the High Efficiency Paxton NOVI 1000 Supercharger, a mechanical-
ly driven centrifugal blower.
This kit comes with all of the parts you will need to install the supercharger. This instruction manual has
been grouped in order of sequence, with photographs and drawings to illustrate the text. This will allow
you quick part identification and orientation.
The installation will require metric and SAE wrenches and sockets, Phillips and standard head screw-
drivers, pliers, wire cutters and a wire crimping tool, a selection of pails or buckets for the collection and
storage of motor fluids, an air impact gun (and air compressor), and a 3/8” NPT tap.
We suggest that you obtain a Prowler shop manual and become familiar with the details of your car’s sys-
tem. Manuals may be obtained from your local Plymouth dealer, or you can order one from Helm
Publications at (800) 782-4356. If your vehicle is not within the normal operating parameters, we do not
recommend the use of a supercharger.
For best results, we suggest that you read this entire manual before beginning. Be familiar with the process
and identify the areas of the car that you will be working on. The average installation time is 14-16 hours.
Your actual install time will depend on your personal skill level, experience installing superchargers, work-
ing conditions, and preparedness for the job at hand. This estimate does not include time for the initial
vehicle inspection, cleaning, fine tuning, or troubleshooting. Once again, before picking up a wrench, read
this entire manual. We are available for technical assistance at (805) 604-1336 between the hours of 7am-
3PM Monday through Friday PST.
After reading this manual, verify that all major assembly groups are present in the main kit box. You
should have ample space to lay out the components. As you remove a box or bag from the main kit, note
the identification label and compare it with the parts list.
Paxton Automotive makes every effort to insure that all
parts are included in the box, but mistakes do occur. If
you discover that you are missing any part, or
that a part is damaged in transit, please call
Paxton Automotive for service. DO NOT attempt installation
if any part(s) are missing from this kit. Failure to contact
Paxton prior to beginning installation will
result in a charge for any missing parts.
Before starting the installation, we suggest that the engine and engine compartment be clean. You can
clean the engine with a pressure washer, such as those used at self-serve car washes. Use a safe-for-alu-
minum cleaner/degreaser, and cover the distributor with a plastic bag to prevent water from entering.