wePresent WiPG-1000 - Manual (Page 27)

27
WiPG-1000 User Manual
→Back
9.6 Login
1. When it connects to a “Code” protection enabled WiPG-1000 receiver,
you have to enter the “Code” and press the “Connect” button to login the
receiver.
(You can find the CODE from the right-upper of OSD standby screen)
2. If you want to connect to another receiver or cancel the login, please press
the “Cancel” button.
9.7 Main User Interface
9.8 Screen Projection
1. Click the “Play” button for full or split screen, you can project the main
screen on to the display immediately, click the “Pause” button, you can
freeze you projection screen, and click the “Stop” button to stop projecting
your screen.
Menu Area
Status Indicator Control Area for Screen
Projection Feature