wePresent WiPG-1000 - Manual (Page 38)

38
WiPG-1000 User Manual
→Back
• <IWB USB Port>: You can configure the IWB USB port to support “IWB
(HID)” device or “Mouse/Keyboard” device
• <Apply>: Confirmation and Save modifications
• <Cancel>: Cancel all the modifications
10.5.3 Network Setup
1. Click [Network Setup] button, it will show the network setting items,
<Note: Auto-Configuration Network Setup on WiPG-1000>
The default setting of the wePresent WiPG-1000 box is DHCP client. When
the wePresent WiPG-1000 box is connected to a LAN that already has a DHCP
server present, the wePresent WiPG-1000 box takes an IP address assigned to
it by the server. When the wePresent WiPG-1000 box is connected to a LAN
that does not have a DHCP server, the wePresent WiPG-1000 box becomes the
DHCP server in the network.
< IP Setup>
• You can select “obtain IP address automatically” or “Use the following IP
address”
• IP Address: The default value is 192.168.100.10.
• Subnet Mask: The default value is 255.255.255.0
• Default Gateway: The default value is 192.168.100.10
• DNS Server: The default value is 192.168.100.10
<DHCP Server Setup>
• You can select “auto(Enable/Disable DHCP Server” or “Disable”)
• Start IP: The start IP address of DHCP Server.
• End IP: The end IP address of DHCP Server
• Subnet Mask: The default value is 255.255.255.0
• Default Gateway: The default value is 192.168.100.10
• DNS Server: The default value is 192.168.100.10