wePresent WiPG-1000 - Manual (Page 39)

39
WiPG-1000 User Manual
→Back
< Wireless Setup>
• Wireless LAN: The default value is “Enable”
• Region: default value is “Worldwide”.
• SSID: SSID string, max. Length is 32 bytes.
• SSID Broadcast: The default value is “Enable”
• Channel: to set fixed channel or Auto. The “Auto” means after power
on wePresent WiPG-1000, it will scan all of wireless channel and select
clear one channel automatically.
• Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit or
128bit in ASCII or HEX string.
• Key:If Encryption is enabled, you have to set key value according to the
encryption mode you selected.
• Channel Bandwidth:20MHz or Auto (20MHz/40MHz)
<SNMP>
You can select “Enable” or ”Disable” option to set up the SNMP function.
And the SNMP community password is the same as the web Admin
password.
< AP Client>
• Connect to Existing AP: Input the SSID of Home WiFi AP you want to
connect.
• Encryption: you can select “Disable” or one of WEP/WPA/WPA2 64bit or
128bit in ASCII or HEX string.
• Key: If Encryption is enabled, you have to set key value according to the
encryption mode you selected.
• Press Apply button, and follow the reboot instruction to make it work.
< Gatekeeper>
Gatekeeper is designed for ensuring the enterprise network security
within wePresent WiPG-1000 box
• All Block can block Guest Users(through wireless) to access all office
network(LAN),
• All Allow can pass Guest Users(through wireless) to access all office
network
• Internet Only can block Guest Users (through wireless) from office
network (LAN) but still reserve internet connection capability.
< Apply > : press button to select this mode.
< Cancel> : press button to abort action.
< Back> : Back to Operating mode main menu.