Xtramus NuApps-2889-RM V1.1 - Manual (Page 48)

48
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
Test Setup
Duration (Sec) The time duration of each test.
Number of Trials The number of the test trial.
Wait for Read
Counter (Sec)
The time gap for showing the counter result.
Learning Setup
¾ Learning Mode: Scroll down to
choose Learning Mode as Never,
Once or Every Trial.
¾ Delay Time After Learning: Set the
time gap between Learning and the
next step.
¾ Frame Count: The number of frame
to be sent.
¾ Frame Gap: The gap in bits between
frames.
Click OK to save the settings, click
Cancel to exit this setting window
without saving, or click Default to
recover the setting to the default value.
Frame size with CRC (Bytes)
Starting from Set the starting frame size with CRC on this field.
Stopping at Set the last frame size with CRC on this field.
Frame Size Step Set the frame size to be added on each step with CRC on this field.
Custom
Selecting the Custom function will enable the
Edit button. Click the Edit button to pop up the
Custom Frame Size window.
¾ Frame Sizes: Shows the default frame size
to select.
¾ Sort: sort the order of the current frame
sizes list as ascending or descending.
¾ Move: You can change the order of each
frame from the frame sizes list here.
¾ Add/Remove: Add a new frame size to the
frame sizes list in the range of 60-2036, or
select a frame from the frame size list and
remove it by clicking the Remove button.
Click OK to save the settings, click Cancel to
exit this setting window without saving, or click
Default to recover the setting to the default
value.
Load
Starting from(%) The initial loading percentage.
Stopping at(%) The end loading percentage.
Percentage
Step(%)
The percentage of loading to be added at each step.