Xtramus NuApps-2889-RM V1.1 - Manual (Page 5)

1. NuApps-2889-RM Overview
Designed for Xtramus Technologies XM-RM series module cards, NuApps-2889-RM is an
application that’s designed base on RFC 2889 for analyzing Ethernet switches, bridges, and
routers. NuApps-2889-RM’s multiple topologies and the load-generating capabilities provide
an effective way to evaluate DUTs on subjects such as Error Filtering, Forwarding, Broadcast Forwarding,
Broadcast Latency, Forward Pressure, Address Learning, Address Caching, and Congestion Control. With
its real-time display of test results and various customizable report formats that allow users to view the test
data and organize them into an appropriate form for debug, report, and record, NuApps-2889-RM is the
best solution for RFC 2889 Benchmarking Methodology.
NuApps-2889-RM must be activated with NuStreams Chassis. NuApps-2889-RM is designed for Xtramus
Technologies XM-RM series module cards. The table down below contains the XM-RM module cards,
FPGA/Firmware versions that are supported by NuApps-2889-RM.
Module Cards Support NuApps-2889-RM
Module Card FPGA Version Firmware Version
XM-RM661/671/681 V3.1b007 v1.6b053
XM-RM751/761/781 V3.1b007 V1.6b056
XM-RM731 V2.1b007 V1.6b040
XM-RM881 v1.4b000 V0.9b026
XM-RM881-2 v1.4b000 V0.9b026
XM-RM891 v1.4b000 V1.6b056
＊ Note: NuStreams-2000i and NuStreams-600i are required as well.
Also, please make sure that your PC meets the requirements listed in the table down below before
installing NuApps-2889-RM.
OS Windows XP Windows Vista/7
RAM 512MB RAM 1GB RAM
CPU Pentium 1.6Ghz or higher
HDD 10 GB Available Space
＊ Note: Large amount of data will be generated while running NuApps-2889-RM. It is
recommended to preserve enough available Hard-Disk space to store these data.
5
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®