Xtramus NuApps-G8261-RM V1.0 - Manual (Page 24)

24
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®
4.2. Quick Launch Buttons
These Quick Launch Buttons allow you to open/save configuration files, module port configuration, test
configuration, and view test reports. Please refer to the section down below for more detail descriptions
regarding to Quick Launch Buttons.
Open
If you have a previously saved configuration
file stored in your PC, you can load it and
apply all the setting you’ve made by
choosing “Open an Existing Configuration”
from the Select Config pop-up window.
Configuration files are saved in the format of
“＊.ini”, and are named with the date/time
when the files are created.
Please note that the module card information
contained in the configuration file you’ve
loaded from your PC MUST match to your
NuStreams Chassis’ current status.
Save
The Save As Configuration function on the
Menu Bar allows you to save the settings
you’ve made.
To save the settings you’ve made, choose
“Save As Configuration” from the Menu
Bar, and choose the file path where you
would like to save the configuration file.
Configuration files are saved in the format of
“＊.ini”.