Xtramus NuOutlet-LN V1.1 - Manual (Page 20)

20
5.2 NuOutlet-LN Window
The NuOutlet-LN Window is used to configure all NuOutlet-LN devices
1 Open – Open saved configuration
(.cfg) files.
7 Counter Chart – Display the counter
chart.
2 File – Load and Save Configuration
files, load log file and exit the program
8 Report – Interval setting, Show
statistics, Alarm setting and Alarm
report.
3 Save – Save configuration (.cfg) files. 9 TFTP – Download Firmware.
4 System – Set device name, Set IP
configuration, Set user name and
password and reset to factory default.
10 Help – Help and about.
5 Open Log Files – Open log (.csv)
files.
11 NuOutlet-LN Information – Display
information on the connected device.
6 Control – Device control and Chart
color setting.
E-mail: [email protected]
Website: www.Xtramus.com
XTRAMUS TECHNOLOGIES ®