AMETEK HPD Series - Manual (Page 14)

Features and Specifications
Features and Functions
12 Operating Manual for GPIB for XT/HPD Series Power Supply
Features and Functions
Features • 16-bit programming and readback of voltage and current
• Programmable soft limits for voltage and current
• Programmable over voltage protection with reset
• Easy-to-use, self-documenting command set
• Isolated user-programmable signals such as fault, polarity, isolation, and
auxiliary signals
• LED status signals: error, addressed, service request, over voltage protection,
and remote operation
• Foldback in CV or CC mode with reset
• Software calibration
Programmable
Functions
• Output voltage and current
• Soft limits for voltage and current
• Overvoltage protection
• Output enable/disable
• Maskable fault interrupt
• Hold and trigger
• User-programmable output relay signals
Readback
Functions
• Actual measured voltage and current
• Voltage and current settings
• Soft voltage and current limits
• Overvoltage protection setting
• Present and accumulated power supply status
• Programming error codes
• Fault codes
• Power supply model and version identification
• Firmware revision levels