AMETEK PLA-PLW - Manual (Page 124)

x Read back and Measurement: Please refer to Specifications
x Resolution: 14 Bits
Important Notes for CCUL, CPUL and CRUH:
1) Cross Mode or Cross Range from one of the normal operating modes into one of
the ultra modes will cause the eLOAD input to disable and not sink any power
2) The maximum current loading in CPUL and CRUH is (.01*I
MAX
)
Local Control:
MODE RANGE
CONSTANT CURRENT ÆAUTO
(PRESS CC HOT KEY) ÆMANU ULO
ÆMANU LOW
ÆMANU MID
ÆMANU HI
CONSTANT POWER ÆAUTO
(PRESS CP HOT KEY) ÆMANU ULO
ÆMANU LOW
ÆMANU MID
ÆMANU HI
CONSTANT RESISTANCE ÆAUTO
(PRESS CR HOT KEY) ÆMANU LOW
ÆMANU MID
ÆMANU HI
ÆMANU UHI
Remote Programming:
[SOURce:]MODe:RANGe
The commands sets and query the operating range at the current operating mode.
Command Syntax MODe:RANGe <NR1>
Parameters range index 0 – Low Range
1 – Middle Range
2 – High Range
3 – Ultra High/Ultra Low Range
Query Syntax MODe:RANGe?
Returned Parameters <NR1>, range index number
C-4