Aplex Technology APC-3218 - Manual (Page 29)

APC-3X18 User Manual 29
RTS 7 8 CTS
RI 9 10 NC
20. JCOM6:
(2.0mm Pitch 1x3 Pin Header) COM6 setting jumper, pin 1~3 are used to select
signal out of pin 10 of COM6 port.
JP1 Pin# Function
Close 1-2 COM5 Pin10=+5V (default)
Close 2-3 COM5 Pin10=+12V (option)
21. COM6:
(2.0mm Pitch 2X5 Pin Header), COM6 Port, standard RS232 ports are provided.
They can be used directly via COM cable connection. COM6 port is controlled
by pins No.
1~3 of JCOM6, select output Signal 5V or 12v, For details, please
refer to description of JCOM6.
Signal Name Pin# Pin# Signal Name
DCD 1 2 RXD
TXD 3 4 DTR
Ground 5 6 DSR
RTS 7 8 CTS
RI 9 10 JCOM6
select Setting
22. USB4/USB5/USB6/USB7:
(Double stack USB type A), Rear USB connector, it provides up to 4 USB2.0
ports, speed up to 480Mb/s.
Each USB Type A Receptacle (2 Ports) Current limited value is 1.5A.
If the external USB device current exceeds 1.5A, please separate connectors
into different Receptacle.