Aplex Technology APC-3218 - Manual (Page 88)

APC-3X18 User Manual 88
5.2 Windows 2000/XP/2003/Vista Universal Driver
Installation for PenMount 6000 Series
Before installing the Windows 2000/XP driver software, you must have the Windows
2000/XP system installed and running on your computer. You must also have one of
the following PenMount 6000 series controller or control boards installed: PM6500,
PM6300.
5.2.1 Installing Software
If you have an older version of the PenMount Windows 2000/XP driver installed in
your system, please remove it first. Follow the steps below to install the PenMount
DMC6000 Windows 2000/XP driver.
1. Please make sure your PenMount 6000 device had plugged in advance. If your
device uses RS232 interface, please plugged in before the machine is turned on.
When the system first detects the controller board, a screen appears that shows
“Unknown Device”. Do not use this hardware wizard. Press Cancel.
2. Insert the product CD install setup.exe. the screen below would appear. Click
touch panel driver