ARRIS SBG6782 AC User Guide - Manual (Page 51)

Gateway Configuration Screen Definitions
SBG6782-AC Wireless Cable Modem & Router • User Guide 42
365-095-23865 x.1
Table 14 – Firewall Local Log Screen-Field Descriptions
FIELD DESCRIPTION
Contact Email Address Your email address.
SMTP Server Name Name of the email Simple Mail Transfer Protocol (SMTP)
server.
Your email server name is required to send a firewall log to
your email address. You can obtain the SMTP server name
from your Internet service provider.
SMTP Username User name for your email account. Check with your email
provider.
SMTP Password Password for your email account. Check with your email
service provider.
Email Alerts Enable or disable emailing firewall alerts.
Remote Log
You can send firewall attack reports out to a standard SysLog server, so that many instances can
be logged over a long period of time. You can select individual attack or configuration items to
send to the SysLog server so that only the items of interest will be monitored.
There are four types of Firewall reports that you can monitor and log:
•
Permitted Connections – Select to notify the server to send you email logs identifying who
is connecting to your network.
•
Blocked Connections – Select to notify the server to send you email logs identifying who
was blocked from connecting to your network.
•
Known Internet Attacks – Select to notify the server to send you email logs of known
Internet attacks against your network.
•
Product Configuration Events – Select to notify the server to send you email logs of the
basic product configuration events logs.
The SysLog server must be on the same network as the Private LAN behind the Configuration
Manager (typically 192.168.0.x).
To activate the SysLog monitoring feature, check all desired event types to monitor and enter the
last byte of the IP address of the SysLog server. Normally, the IP address of this SysLog server
is hard coded so that the address always agrees with the entry on this page.