Artesyn ATCA-8330 Installation and Use (April 2015) - Manual (Page 87)

BIOS
ATCA-8330 Installation and Use (6806800S82B) 87
4.7.5 Boot
In this menu, the boot order can be configured. Use the keys '+' or '-' to move up or move down
a boot entry in the boot list.
A boot entry can be enabled or disabled by pressing '!'. If the boot entry shows a '!' as first
character, this boot entry is disabled.
You can control the execution of device specific Option ROM in the Main ' Boot Features menu.
4.7.6 Exit
HDD Password Select User Only (Default)
User + Master Supports user only or both user and master
password.
TPM Support Enable (Default)
Disable Enable/Disable TPM support.
TPM Action -- Enact TPM Action. Note: Most TPM actions
require TPM to be Enabled to take effect.
Omit Boot Measurement Enabled
Disabled (Default) Enabling this option causes the system to
omit recording boot device attempts in
PCR[4].
Table 4-13 Security
Item Values Description
Table 4-14 Exit Menu
Item Values Description
Exit Saving Changes -- Equal to F4, save all changes of all menus,
then exit the BIOS setup and reset the
system.
Exit Discarding Changes -- Do not save changes, exit the BIOS setup, do
not reset the system.
Load Setup Defaults -- Equal to F3. Load BIOS default values.