Hardware preparation and installation, 1 environmental and power requirements, 1 environmental requirements – Artesyn COMX-CORE Series Installation and Use (August 2014) User Manual
Page 29: Table 2-1, Environmental requirements, Outline, Chapter 2

Chapter 2
COMX-CORE Series Installation and Use (6806800K11F)
29
Hardware Preparation and Installation
2.1
Environmental and Power Requirements
2.1.1
Environmental Requirements
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
Operating temperatures refer to the temperature of the air circulating around the board and
not to the component temperature.
Product Damage
High humidity and condensation on surfaces cause short circuits.
Do not operate the system outside the specified environmental limits. Make sure the
product is completely dry and there is no moisture on any surface before applying power.
Table 2-1 Environmental Requirements
Requirement
Operating
Non-Operating
Cooling Method
Forced-Air
Temp Cycle Class
-40°C–85°C:500cyc
Temperature
0°C–55°C
-40 °C - 85 °C
Humidity
10 -90% Non-condensing
-
Vibration
0.01g ^2/Hz at 5-500 Hz
Random Vibration
Shock
20 g 11 ms sine or saw
-
Altitude
-60–4000 m ASL