Artesyn COMX-CORE Series Installation and Use (August 2014) - Manual (Page 95)

BIOS
COMX-CORE Series Installation and Use (6806800K11F) 95
Table 5-26 North Bridge Configuration
Field Description
Common Northbridge
Control Control various common Northbridge functions, See Common
Northbridge Control
Arrandale_Clarkdale Arrandale options, See Arrandale_Clarkdale
Arrandale_Clarkdale
MRC/QPI Arrandale MRC options, See Arrandale_Clarkdale MRC/QPI
Primary Display Select which of IGD/PEG graphics device should be primary display
Options: Auto, IGD, PEG
Default is Auto
Table 5-27 Common Northbridge Control
Field Description
PEG Port Configuration PEG Port options, see PEG Port Configuration
VT-d Check to enable VT-d function on MCH
Default is Disabled
Table 5-28 PEG Port Configuration
Field Description
Always Enable PEG enables the PEG slot
Default is Disabled
Force X1 Force PEG link to retrain to X1 mode
Default is Disabled
Table 5-29 Arrandale_Clarkdale
Field Description
IGD-LCD Control See IGD - LCD Control