ATEIS PSS-G2-xx - Manual (Page 23)

PSSG2, CD-Touch series
Page 23 of 33
• Press the CHIME key. The chime key will be blinking during the chime broadcasting. The
Microphone key will be automatically activated after the chime broadcasting.
o In Press To Talk Mode: press and keep your finger on the CHIME key. (CD-Touch:
keep the contact closed)
o In Lock To Talk Mode: press once on the CHIME key. (CD-Touch: apply one contact
closure)
• The TALK key will be red highlighted to indicate that the call is active.
• To stop the key:
o In Press To Talk Mode: release your finger from the CHIME key. (CD-Touch: release
the contact)
o In Lock To Talk Mode: press once on the CHIME or TALK key. (CD-Touch: apply
one contact closure)
9.3. Starting a message
The number of messages available depends on the VACIE system connected to the PSSG2, CD-
TOUCH microphone. However, the way to start a message is identical.
• Press on the zone(s) key in which you want to start the message
• Press on the MESSAGE Key
• The Message page is displayed, see below.