Avery Dennison Monarch 939 Rewinder - Manual

Monarch  and 935 are trademarks of Avery Dennison
Retail Information Services LLC.
TC0935OI Rev. AF 10/10
2007 Avery Dennison Corp. All rights reserved.
R e w i n d e r S p e c i f i c a t i o n s
Height: 8.5 inches (210 mm)
12 inches (305 mm) with disks attached
Width: 10 inches (255 mm)
Depth: 10 inches (255 mm)
Weight: 10.9 lb. (5 kg)
Hub
Diameters: 3 inches (76 mm Rewinder P/N M093503)
4 inches (102 mm Rewinder P/N M093502)
1 inches (25 mm – optional kit)
3 inches (76 mm – optional kit)
Coreless (optional kit)
Rewind
Speed: 1 to 12 inches per second
(25 mm to 305 mm)
Operating
Temperature: 40
F to 110F (4C to 43C)
Storage
Temperature: 15
F to 120F (-9C to 49C)
Relative
Humidity: Operating and Storage:
5% to 90% non-condensing
S u p p l y S p e c i f i c a t i o n s
Supply
Thickness: 0.005 inches to 0.012 inches
(0.13 mm to 0.30 mm)
Supply
Width: 1.2 inches to 4.125 inches
(30 mm to 105 mm)
Coreless
Maximum: 1200 inches (30,480 mm)
For supplies, service or assistance, call toll free:
1-800-543-6650 (In the U.S.A.)
1-800-387-4740 (In Canada)
www.monarch.com
O P E R A T I N G I N S T R U C T I O N S
These instructions explain how to set up and use the
Monarch
 935 Rewinder.
To use multiple core sizes, order Rewinder M093502 and
optional Core Kit P/N 124476 which includes a 1”core, a 3”
core, and a spindle and bale for coreless operation.
U n p a c k i n g t h e R e w i n d e r
After unpacking the rewinder, you should have the rewinder,
power supply with cord, the base, four Phillips screws, two
supply guide disks, two core holders, and a retainer with
thumbscrew. Keep the box and packaging material in case
the rewinder ever needs repair.
A s s e m b l i n g t h e R e w i n d e r
To assemble the rewinder, you need a Phillips screwdriver.
1. Line up the holes in the base with the holes in the
bottom of the rewinder.
2. Use the four Phillips screws to attach the base to the
rewinder. The lower pin prevents the pick-up arm from
being assembled on the wrong side of the shaft.
CAUTION: Do not lift or carry the rewinder using
the pick-up arm.
R ew in d er
B a s e
P h il l ip s
S cr ew
P i ck - u p a r m
P i n