Avery Dennison Monarch 926 Knife - Manual

TC0926AD Rev. CN 10/10
2001 Avery Dennison Corp. All rights reserved.
M O N A R C H
®
9 2 6  K N I F E A D D E N D U M
Use these instructions with the Monarch® 9855® printer and the optional
knife. Information in this document supercedes information in previous
versions. Check our Web site (
www.monarch.com ) for any updates.
Caution: Do not place your fingers or any other objects into the knife.
I n s t a l l i n g t h e K n i f e
The knife, printer, and stacker must be installed on a level surface. Turn off
the printer before you install the knife.
1. Using a Phillips screwdriver, remove the base cover.
2. Replace the screw. You can throw away the base cover.
3. Press down on the exit cover tabs to open the exit cover on the front of
the printer.
E x i t c o ve r t a b s
Base cover