Bebe Confort Rodi XP - Manual (Page 8)

15 14
EN EN
Your child in the Bébé Confort Rodi XP 2
1. Never leave your child unattended.
2. Always secure your child with the seat belt.
3. Make sure the headrest is adjusted to the proper height.
4. Before every use, make sure the seat belt is not damaged
or twisted.
5. Remove all objects from the child’s coat and trouser
pockets so they cannot get stuck between the child and
the seat belt. Such objects could cause injury in case of an
accident.
6. Tell your child not to play with the seat belt buckle and to
keep its head against the headrest.
Bébé Confort Rodi XP 2 in the car
1. Use the Bébé Confort Rodi XP 2 only on a front-facing seat
that is fitted with an automatic or static 3-point belt that
has been approved according to the ECE R16 standard or
similar. Do NOT use a 2-point belt.
2. Make sure the car seat can be installed properly in your car
before purchasing it.
3. Always fully install the Bébé Confort Rodi XP 2 with the car
seat belt, even if there is no child in it.
4. Deactivate the airbag if using the Bébé Confort Rodi XP 2
on the front passenger seat. If this is not possible, place
the passenger seat in the rearmost position.
5. Remove the car seat headrest if it stops you from adjusting
the headrest of the Bébé Confort Rodi XP 2 to the desired
height.
6. Always install both components of the Bébé Confort
Rodi XP 2: seat + back support.
7. Make sure that fold-down rear seats are locked into
position and that the back rest of the car seat is upright
position.
8. Prevent the Bébé Confort Rodi XP 2 from becoming
trapped or weighed down by luggage, seats and/or
slamming doors.
9. Make sure all luggage and other loose objects are secured.
10. Always cover the Bébé Confort Rodi XP 2 when exposed to
direct sunlight in the car. Otherwise, the cover may
discolour and plastic parts may become too hot for your
child’s skin.
Warning: The Bébé Confort Rodi XP 2 must only be installed
in the car in a forward-facing position.
Environment
Keep all plastic packaging materials out of reach of your child
to avoid the risk of suffocation.
For environmental reasons, when you have stopped using this
product, we ask that you dispose of the product in the proper
waste facilities in accordance with local legislation.
Questions
If you have any questions, contact your local Bébé Confort
retailer (see www.bebeconfort.com for contact information).
Make sure that you have the following information on hand:
- Serial number on the orange ECE sticker at the bottom of
the Bébé Confort Rodi XP 2 base;
- Car make and model and seat on which the Bébé Confort
Rodi XP 2 is used;
- Age, height and weight of your child.
Warranty
We guarantee that this product was manufactured in
accordance with the current European safety requirements and
quality standards which are applicable to this product, and
that this product is free from defects in workmanship and
material at the time of purchase. During the production
process the product was subjected to various quality checks.
If this product, despite our efforts, shows a material/
manufacturing fault within the warranty period of 24 months,
(with normal use as described in the user instructions) we will
comply with the warranty terms and conditions. In this case
please contact your dealer. For extensive information on
applying the warranty terms and conditions, you can contact
the dealer or look on our website: www.bebeconfort.com.
The warranty is not valid in the following cases:
• In case of a use or purpose other than described in the
manual.
• If the product is submitted for repair through a dealer that
is not authorized by us.
• If the product is not supplied to the manufacturer with the
original purchase receipt (via the retailer and/or importer).
• If repairs were carried out by third parties or a dealer that
is not authorized by us.