BECKHOFF BC7300 - Manual (Page 25)

BC7300 25
Parameterisation Table
Parameter x 10 x 1 Default Parameter value
0 1..9 - Indicates the parameter of the x 10 function
1 RTU mode Modbus 1
2
1
ASCII mode
1 8 data bits, no parity one stop bit
2 8 data bits even Parity one stop bit
3 8 data bits odd Parity one stop bit
4 7 data bits even Parity one stop bit
5 7 data bits odd Parity one stop bit
6 one stop bit
7 2 stop bits
8 8 data bits, no parity two stop bits
9 8 data bits even Parity two stop bits
10 8 data bits odd Parity two stop bits
11 7 data bits even Parity two stop bits
Frame 2
12
1
7 data bits odd Parity two stop bits
1 38400 baud
2 19200 baud
3 9600 baud
4 4800 baud
5 2400 baud
6 1200 baud
7 600 baud
8 300 baud
Baud rate 3
9
3
150 baud
End of Frame Time 4 0..9 0 In ms for RTU mode (0 dependent on the baud
rate)
In seconds for ASCII mode (0 EOF time switched
off)
Watchdog 100 ms 5 0..9 0 Watchdog x 100 ms
Watchdog 1000 ms 6 0..9 1 Watchdog x 1000 ms
Factory setting 9 9