Beisler 1281-4 - Manual (Page 41)

2-15
Top feed adjustment
F9 20 80
Bottom feed adjustment
F10 20 80
Mouse backward
F11 100 3500
Pulling device up/down
F12 0 1000 STEP
3.8 Meanings of the used symbols
Step type symbols
Pause - passing of a time
if the time symbol is programmed in a step, the program
sequence will be continued after the programmed time
has passed; outputs can be enabled in this step.
A
Continue with next step
it will be switched to the next step automatically after the
displayed step has been executed.
Program-specific symbols
Manual sewing
if this icon is contained in a step, you can sew manually
pressing the foot pedal forward; switch to the next pro-
gram step by pressing the foot pedal backward.
Semi-automatic execution
if this icon is contained in a step, the step will be switched
on by pressing the foot pedal forward; after a program-
med time expired or a stitch counting, it will be switched
to the next step automatically.
Automatic execution
this step will be executed automatically.
Fn
Enabled outputs
one or several outputs are enabled in this step; position
the cursor on this icon and press the Special key, to
display the enabled outputs; crossed out icons represent
disabled outputs.