Beurer BC 40 - Manual (Page 19)

19
3. Unit description
1. Display
2. Battery compartment lid
3. Wrist cuff
4. START/STOP button
5. Memory button M
Information on the display:
1. Systolic pressure
2. Diastolic pressure
3. WHO classification
4. Time and date
5. Calculated pulse value
6. Cardiac arrhythmia sym-
bol
7. Pulse symbol
8. Battery replacement sym-
bol
9. Memory space number/
memory display average
value ( A ), morning ( AM ), evening ( PM )
10. Release air (arrow)
4. Preparing the measurement
Insert the batteries
• Remove the battery compartment lid on the right side of
the device.
• Insert two 1.5 V micro (alkaline type LR03) batteries. Make
sure that the batteries are inserted the correct way round.
Do not use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery replacement symbol
is displayed, you can
no longer perform any measurements and must replace all
batteries.
Used batteries should not be disposed of in normal house-
hold waste. Dispose of them via your electronics retailer or
your local recycling point. You are legally obligated to do so.
Note: The codes below are printed on batteries
containing harmful substances: Pb: battery
contains lead, Cd: battery contains cadmium,
Hg: battery contains mercury.
Setting the hour format, date and time
This menu allows you to set the following functions, one
after another.
Hour format ➔ Date ➔ Time
1
5 4
2
3
1
2
3
4
5 6 7
9
10
8
Pb Cd Hg