Beurer BC 40 - Manual (Page 24)

24
Displaying average values
• Press the memory button M.
A flashes on the display.
The average value of all saved measurements is
displayed.
• Press the memory button M.
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morning:
5.00 a.m. – 9.00 a.m.).
• Press the memory button M.
PM flashes on the display.
The average value of the evening measure-
ments for the last 7 days is displayed (evening:
6.00 p.m. – 8.00 p.m.).
Displaying individual measurements
• When the memory button M is pressed again,
the last individual measurement is displayed.
• When the memory button M is pressed again,
you can view your individual measurements.
• To switch the device off again, press the
START/STOP button .
You can exit the menu at any time by pressing the
START/STOP button .
Deleting measurements
Deleting individual measurements
• Start individual measurement access.
• Press and hold the memory button M for approx. 5 sec-
onds. The relevant measurement is deleted.
• The display starts to flash, then an empty display with
empty user memory frame is displayed. Press the mem-
ory button M to delete additional values or press the
START/STOP button to switch off the device.
Deleting all measurements
• Start access to average value of all saved measurements
by pressing the memory button M twice.
• Press and hold the memory button M for approx. 5 sec-
onds. All measurements are deleted.
• The display starts to flash, then an empty display with
empty user memory frame is displayed. Press the mem-
ory button M to delete additional values or press the
START/STOP button to switch off the device.
7. Error messages/troubleshooting
In the event of errors, the error message _ appears on
the display.
Error messages may appear if: