Beurer BC 40 - Manual (Page 20)

20
It is essential to set the date and time. Otherwise, you will
not be able to save your measurements correctly with a
date and time and access them again later.
If you press and hold the memory button M you can set
the values more quickly.
To access the settings mode, either reinsert the batteries or
press and hold the START/STOP button for 5 seconds
when the device is switched off.
Hour format
• Select the desired hour format using the
memory button M and confirm with the
START/STOP button .
Date
The year flashes on the display.
• Select the desired year using the memory
button M and confirm with the START/
STOP button .
The month flashes on the display.
• Select the desired month using the memory
button M and confirm with the START/STOP
button .
The day flashes on the display.
• Select the desired day using the memory button M and
confirm with the START/STOP button .
If the hour format is set as 12h, the day/month display
is reversed.
Time
The hours flash on the display.
• Select the desired hour using the memory but-
ton M and confirm with the START/STOP but-
ton .
The minutes flash on the display.
• Select the desired minute using the memory
button M and confirm with the START/STOP
button .
Once all the data has been set, the device switches off
automatically.