Beurer BC 60 - Manual (Page 21)

21
• the inflation pressure is higher than 300 mmHg (ERR 300),
• the batteries are almost empty .
In such cases, repeat the measurement. Ensure you do not
move or speak. If necessary, re-insert or replace the batteries.
9. Specifications
Model No. BC 60
Method of Oscillating, non-invasive blood pressure
Measurement measurement on the wrist
Range of Pressure 0 – 300 mmHg,
Measurement pulse 40 – 160 beats/minute
Accuracy of the systolic ± 3 mmHg / diastolic ± 3 mmHg /
pressure reading pulse ± 5 % of the displayed value
Measuring max. permissible standard deviation
uncertainty according to clinical testing:
systolic: 8 mmHg / diastolic: 8 mmHg
Sets of Memory 2 x 60 memory places
Unit Dimension L 72 x W 80 x H 28.7 mm
Unit Weight Approx. 140 g
Cuff Size For a wrist circumference of approx.
125 to 215 mm
Operating
Temperature +10 °C to +40 °C, ≤ 85 % RH
Storage-Temperature -5 °C to +50 °C, ≤ 85 % RH
Power Supply 2 x 1,5 V Micro (Alkaline Type LR 03)
Battery Life For 250 measurements
Accessories Storage box, instructions for use,
2 x AAA batteries
Classification Application part Type BF
Key to symbols Application part Type BF
Important! Read the operating
instruction!
These specification are subject to change without notice for
purpose of improvement.
• This unit is in line with European Standard EN60601-1-2
and is subject to particular precautions with regard to
electromagnetic compatibility (EMC). Please note that
portable and mobile HF communication systems may in-
terfere with this instrument. For more details, please con-
tact customer service at the address indicated.
• The instrument is in line with the EU Medical Products
Directive 93/42/EC, the German medical products act
and European standards EN1060-1 (non-invasive blood
pressure monitors, Part 1: general requirements) and
EN1060-3 (non-invasive blood pressure monitors, Part
3: Supplementary Requirements for Electromechanical
Blood Pressure Measurement Systems).
• If you are using the instrument for commercial or eco-
nomic purposes, you must check measurement precision
regularly in accordance with the ’Operators’ Ordinance
on Medical Products’. Even in the case of private use, we
recommend checking measurement precision every two
years at the manufacturers.