Cleaning and storing the instrument, Rectifying faults, Specifications – Beurer BM 75 User Manual

Page 29

Advertising
background image

29

9. Cleaning and storing the instrument

• Clean your device and cuff carefully only with a slightly mois-

tened cloth.

• The frequency of cleaning depends on the contamination

level of the device. Clean the blood pressure device and cuff

as soon as any dirt appears on the device.

• Do not use detergents or solvents.

• On no account must you immerse the computer in water,

otherwise liquid can enter it and cause demage.

10. Rectifying faults

Error messages can occur when

• measurement error ( appears in the display),

• you move or talk during the measurement ( appears in the

display),

• the cuff tube is not properly inserted ( appears in the dis-

play),

• inflation takes longer than 15 seconds ( appears in the dis-

play),

• the inflation pressure is higher than 300 mmHg ( appears

in the display),

• an error occurs when storing the measured values ( ap-

pears in the display),

• exceeding measurement range ( appears in the display),

• the data could not be sent to the PC (

appears in the

display).

In the about cases, you must repeat the measurement. Make

sure that the cuff tube is properly inserted and that you do not

move or talk. Put the batteries back in if necessary, or else

replace them.

11. Specifications

Model no.

BM 75

Measurement

method

Oscillometric, non-invasive blood pres-

sure measurement on the upper arm

Measurement range

Cuff pressure 0 – 300 mmHg,

systolic 30 – 260 mmHg,

diastolic 30 – 260 mmHg,

Pulse 40 –199 beats/minute

Display accuracy

Systolic ± 3 mmHg, diastolic ± 3 mmHg,

pulse ± 5 % of the value shown

Measurement

inaccuracy

Max. permissible standard deviation

according to clinical testing:

systolic 8 mmHg /diastolic 8 mmHg

Memory

2 x 60 memory spaces

Dimensions

L 175 mm x W 117 mm x H 50 mm

Weight

Approx. 478 g (without batteries)

Cuff size

24 to 36 cm

Permissible operating

conditions

+10 °C to + 40 °C, 15 % – 85 % relative

air humidity (non-condensing)

Permissible storage

and transport condi-

tions

- 10 °C to + 60 °C, 10 % – 90 % relative

air humidity, 700 –1060 hPa ambient

pressure

Power supply

4 x 1,5 V

AAA batteries

Battery life

For approx. 120 measurements, de-

pending on the blood pressure level

and/or pump pressure

Advertising