BrightSign HD2000 User Guide - Manual (Page 26)

20
•
•
•
•
•
•
Playlist commands
Here is the list of commands that you can use in a playlist:
BMP, MP3, MPG, VOB, PNG (HD2000 only), JPG (HD2000 only)
Any line that is a file name and that ends in one of these extensions is valid. Names may contain
spaces.
debug
Use this command to view debug information on the display (serial port).
rem <comment>
Any line starting with rem is ignored, so you can include comments in your playlist. Rem is short
for remark.
print <line to print to console>
Use this command to send a line of text to the display. This command is useful for debugging.
audiomode # (default is 1)
BrightSign provides 5.1 audio decoding that is controlled via the audiomode command. If your
audio source is a video file, you can use any of the following audiomode commands:
• audiomode 0: Provides decoded 5.1 surround sound (via USB or all six analog outs).
• audiomode 1: Mixes down 5:1 surround sound to stereo.
• audiomode 2: Mutes the audio.