Viewmode <setting> (default is 0), Videomode <mode, Viewmode <setting – BrightSign HD2000 User Guide User Manual
Page 28
22
•
•
•
•
•
•
videomode <mode>
(HD600 default is 1024x768x60p; HD2000 default is 1280x720x60p)
Set the output framebuffer format. The options are:
VGA:
• 1024x768x60p
• 640x480x60p (HD600 only)
• 800x600x60p (HD600 only)
• 1280x768x60p (HD2000 only)
Component:
• 720x480x60p
• 720x576x50p (HD2000 only)
• 1280x720x60p
• 1280x720x50p (HD2000 only)
• 1920x1080x60i (HD2000 only)
Composite (HD 600 only):
• NTSC
• PAL
Viewmode <setting>
(default is 0)
You can use a view mode that is different from the default by setting the mode prior to starting
video playback. The view_mode values are:
• 0: Scales the video to fill the screen without maintaining the aspect ratio. Images may appear
stretched.
• 1: Centers the image and adds black borders. This is also referred to as letter boxed video. The
aspect ratio is maintained.
• 2: Centers the image and fills the screen. The aspect ratio is maintained.