BrightSign HD2000 User Guide - Manual (Page 47)

41
•
•
•
•
•
•
Example 5 contains three simultaneous states.
• The first state specifies the video mode, image mode, and audio output for video. In this case,
the keyword VideoPlayerAudioOutput directs BrightSign to output stereo PCM via the SPDIF
audio connector. This machine uses button 0 and the videoend event to control the videos
and the image.
• Note the NEXT keyword on line 10; it signals the beginning of another state.
• The second state uses analog audio output through the Audio 2 connector. It uses button 1
and the audioend event to control the audio playback.
• The NEXT keyword on line 18 indicates the start of the third state.
• The third state uses analog audio output through the Audio 3 connector, and it uses button 2
and audioend events to control its audio playback.
Using rollover regions
In the previous section, Using Excel to create interactive presentations , you learned that you
can create touchable (clickable) areas on the screen using elo (elor) and eloc keywords in the
EVENTS row of an interactive playlist. You can then use these regions like buttons to playback
content. You can also set up any touch region as a rollover region. Rollover regions enable you to
create more dynamic and interactive presentations that accept mouse and touch input and that
are also sensitive to cursor movement. A rollover region has an ON image and an OFF image.
Whenever the cursor is within a rollover region, BrightSign displays the ON image, and when the
mouse cursor is outside the rollover region, BrightSign displays the OFF image. Therefore,
rollover regions enable you to include features such as highlighting buttons as the user moves
the cursor moves over them.