BrightSign HD2000 User Guide - Manual (Page 35)

29
•
•
•
•
•
•
VIDEOPLAYERAUDIOVOLUME <volume> (HD2000 only)
Sets the volume when playing a video. The volume parameter can be any number between 0 and
100.
AUDIOPLAYERAUDIOOUTPUT <audio output> (HD2000 only)
Sets the audio output when playing an audio file.
• 0: Outputs analog audio.
• 1: Outputs USB audio.
• 2: Outputs SPDIF audio in stereo PCM.
• 3: Outputs SPDIF audio in raw AC3.
• 4: Outputs analog audio with SPDIF mirroring raw AC3.
AUDIOPLAYERAUDIOSTEREOMAPPING <stereo mapping> (HD2000 only)
Sets the analog output when playing an audio file. Use this parameter if the
AUDIOPLAYERAUDIOOUTPUT parameter is set to 0 – Analog audio.
• 0: Maps stereo audio to Audio 3.
• 1: Maps stereo audio to Audio 2.
• 2: Maps stereo audio to Audio 1.
AUDIOPLAYERAUDIOVOLUME <volume> (HD2000 only)
Sets the volume level when playing an audio file. The volume parameter can be any number
between 0 and 100.