D-Link DIR-68 - Manual (Page 27)

7 D-Link DIR-68 User Manual
Section  - Configuration
MTU:
Clone MAC
Address:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the default
MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not recommended that
you change the default MAC address unless required by your ISP. You can use the Clone.Your.PC’s.MAC.Address button to replace the
Internet port’s MAC address with the MAC address of your Ethernet card.