D-Link DIR-68 - Manual (Page 50)

50 D-Link DIR-68 User Manual
Section  - Configuration
Enter the IP address of packets that will take this
route.
Enter the netmask of the route, please note that the
octets must match your destination IP address.
Enter your next hop gateway to be taken if this route
is used.
The route metric is a value from 1 to 16 that indicates
the cost of using this route. A value 1 is the lowest
cost and 15 is the highest cost.
Select the interface that the IP packet must use to
transit out of the router when this route is used.
Destination IP:
Netmask:
Gateway:
Metric:
Interface:
Routing
The Routing option is an advanced method of customizing specific routes of data through your network.