D-Link DIR-68 - Manual (Page 42)

4 D-Link DIR-68 User Manual
Section  - Configuration
Network Filters
Select Turn. MAC. Filtering. Off, allow. MAC.
addresses.listed.below, or deny.MAC.addresses.
listed.below from the drop-down menu.
Enter the MAC address you would like to filter.
To find the MAC address on a computer, please
refer to the Networking. Basics section in this
manual.
Select a DHCP client from the drop-down menu
and click << to copy that MAC Address.
Configure MAC
Filtering:
MAC Address:
DHCP Client:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from accessing
the Network. You can either manually add a MAC address or select the MAC address from the list of clients that are currently connected
to the Broadband Router.