D-Link DIR-68 - Manual (Page 59)

59 D-Link DIR-68 User Manual
Section  - Configuration
Use this option to save the current router configuration
settings to a file on the hard disk of the computer you
are using. First, click the Save button. You will then
see a file dialog, where you can select a location and
file name for the settings.
Use this option to load previously saved router
configuration settings. First, use the Browse control
to find a previously save file of configuration settings.
Then, click the Load button to transfer those settings
to the router.
This option will restore all configuration settings
back to the settings that were in effect at the time
the router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router configuration settings, use the Save
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to Factory
Default Settings:
Reboot Device:
System Settings