D-Link DIR-68 - Manual (Page 82)

8 D-Link DIR-68 User Manual
Section 5 - Connecting to a Wireless Network
Connect to a Wireless Network
Using Windows ® XP
Windows ® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service Pack
 users. If you are using another company’s utility or Windows ® 000, please refer to the user manual of your wireless adapter for
help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows ® XP utility as seen
below.
Right-click on the wireless computer icon in your system tray
(lower-right corner next to the time). Select View.Available.Wireless.
Networks.
If you receive the Wireless.Networks.Detected bubble, click on the
center of the bubble to access the utility.
or
The utility will display any available wireless networks in your area.
Click on a network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you TCP/
IP settings for your wireless adapter. Refer to the Networking.Basics
section in this manual for more information.