D-Link DIR-68 - Manual (Page 56)

56 D-Link DIR-68 User Manual
Section  - Configuration
Time Settings
Select the Time Zone from the drop-down menu.
To select Daylight Saving time manually, select
enabled or disabled, and enter a start date and an end
date for daylight saving time.
NTP is short for Network Time Protocol. NTP
synchronizes computer clock times in a network of
computers. Check this box to use a NTP server. This
will only connect to a server on the Internet, not a
local server.
Enter the NTP server or select one from the drop-
down menu.
To manually input the time, enter the values in these
fields for the Year, Month, Day, Hour, Minute, and
Second and then click Set.Time. You can also click
Copy.Your.Computer’s.Time.Settings.
Time Zone:
Daylight Saving:
Enable NTP
Server:
NTP Server Used:
Manual:
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this
section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically
adjust the time when needed.