D-Link DIR-68 - Manual (Page 51)

51 D-Link DIR-68 User Manual
Section  - Configuration
Set the transmit power of the antennas.
Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value. 100 is
the default setting and is recommended.
This value should remain at its default setting of 4.
If inconsistent data flow is a problem, only a minor
modification should be made.
The fragmentation threshold, which is specified in bytes,
determines whether packets will be fragmented. Packets
exceeding the 46 byte setting will be fragmented before
transmission. 46 is the default setting.
(Delivery Traffic Indication Message)  is the default
setting. A DTIM is a countdown informing clients of the
next window for listening to broadcast and multicast
messages.
Enabling WLAN Partition prevents associated wireless clients from communicating with each other.
Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher
data loss.
Transmit Power:
Beacon Period:
RTS Threshold:
Fragmentation
Threshold:
DTIM Interval:
WLAN Partition:
Short GI:
Advanced Wireless Settings